PSG15-LS-750W PSG15-LS-750W
PSG15-LS-750W PSG15-LS-750W
PSG15-LS-750W PSG15-LS-750W
PSG15-LS-750W PSG15-LS-750W

PINSI PSG15 High Torque Single Axis Linear Stage

PINSI PSG15 is a high-performance heavy-load single-axis linear module designed for industrial automation and CNC equipment. It adopts a φ20mm C7 precision ball screw and supports multiple motor power options up to 750W, ensuring strong thrust and stable high-speed motion.

With stroke range up to 1200mm and multiple lead options (5/10/20/32mm), PSG15 provides flexible configuration for different motion requirements. It is widely used in robotic systems, gantry structures, inspection machines, and high-load positioning applications.

GET A QUOTE

PINSL PSG15 High Torque Single Axis Linear Stage

The PSG15 is a heavy-duty single-axis linear module built for high-load and high-speed industrial automation. It features a φ20 mm C7 precision ground ball screw, supports up to 750 W servo motors, and delivers a maximum thrust of 2563 N — making it suitable for demanding applications such as CNC gantries, heavy-load pick-and-place, and large-format machining systems.

PSG15 high torque linear stage overview with ball screw and motor mounting

Core Advantages

  • Generate up to 2563 N thrust – handles heavy payloads and high-resistance machining operations.
  • Reach speeds up to 2000 mm/s – selectable lead options (5/10/20/32 mm) optimize speed vs. thrust for your specific cycle time requirements.
  • Maintain ±0.01 mm repeatability – ensures consistent positioning accuracy under varying load conditions.
  • Cover strokes from 50 to 1200 mm – accommodates a wide range of automation cell sizes.
  • Support 750 W servo motors – provides ample torque for high-acceleration and vertical-axis applications.
  • Choose from multiple mounting orientations – motor left, right, bottom, or exposed installation for flexible integration.

Technical Specifications

Parameter Specification
Drive Type Precision ball screw (φ20 mm, C7 grade, preloaded nut)
Repeatability ±0.01 mm
Stroke Range 50 – 1200 mm (50 mm pitch increments)
Motor Power 750 W AC servo (compatible with Mitsubishi, Yaskawa, Panasonic, Delta)
Coupling 12 × 19 mm (flexible coupling included)
Motor Mounting Left / Right / Bottom / Exposed (field-configurable)

Lead – Speed – Thrust Reference Table

Lead (mm) Max Speed (mm/s) Max Thrust (N) Typical Application
5 250 2563 High-thrust / low-speed (milling, pressing)
10 500 1281 Balanced thrust and speed (general CNC)
20 1000 640 High-speed positioning (pick-and-place)
32 2000 320 Ultra-high-speed transfer (sorting, inspection)

* Thrust values are calculated at rated motor torque. Actual performance may vary with motor brand, driver settings, and duty cycle.

Product Structure View

PSG15 mechanical dimension drawing with mounting hole patterns
PSG15 cross-section view showing ball screw, guide rails, and carriage assembly

Design & Performance Highlights

The PSG15 is built around a high-rigidity aluminum extrusion profile that supports a φ20 mm ball screw and wide-base linear guide system. The carriage is machined with precision reference surfaces, ensuring parallelism between the screw axis and guide rails without requiring shimming or field alignment.

The preloaded ball nut is factory-set to eliminate backlash, while the flexible coupling (12 × 19 mm) accommodates minor motor shaft misalignment and reduces stress on the screw bearings. The motor mounting bracket supports four orientation configurations (left, right, bottom, and exposed), allowing the stage to fit into tight machine enclosures or multi-axis gantry arrangements.

Motor Configuration

The PSG15 accepts standard 750 W AC servo motors with 12 mm shaft diameters. Optional mounting brackets are available for Mitsubishi, Yaskawa, Panasonic, and Delta servo series. Four installation modes — motor left, motor right, motor bottom, and exposed (in-line) — provide flexibility for different system layouts.

Typical Applications

  • Heavy-duty CNC automation systems (milling, drilling, routing)
  • Industrial gantry robots with high payload capacity
  • High-speed pick-and-place systems
  • Inspection and measurement equipment requiring long travel
  • Multi-axis XYZ platforms and custom automation cells

Customization Options

  • Custom stroke lengths (outside 50–1200 mm range on request)
  • Screw lead selection (5 / 10 / 20 / 32 mm) to optimize speed vs. thrust
  • Motor mounting bracket for specific servo brands and models
  • Motor orientation (left / right / bottom / exposed) – field configurable
  • Integrated limit/home sensor kits (NPN/PNP, magnetic reed, or optical)
  • Protective bellows or metal covers for dusty or coolant-laden environments
  • Vertical orientation brake kits
  • Special lubrication options for cleanroom or food-grade applications

Why Choose the PSG15?

For applications requiring both high speed and high thrust, the PSG15 offers a combination rarely found in a single-axis stage of its footprint. Its 20 mm screw diameter and 32 mm lead option enable 2000 mm/s travel speed, while the 5 mm lead option delivers 2563 N thrust for heavy cutting or pressing operations — giving you the flexibility to optimize for speed or force without changing hardware.

Compared to compact-profile modules with smaller screws (12–16 mm), the PSG15's larger screw diameter provides higher torsional stiffness and better resistance to deflection under load, particularly at extended stroke lengths above 800 mm. This makes it a reliable choice for gantry systems where the stage operates in cantilever or high-moment configurations.

PINSL PSG15 – high torque, high speed, built for the factory floor.

Inquiry & Customization

We offer customized stroke lengths, motor integration, load optimization, and installation direction adjustments. Contact our application engineering team for technical drawings, CAD models, or complete OEM solutions tailored to your specific machine requirements.

Inquiry

feedback
top