1. Do not remove the cross rail arbitrarily, as it may cause foreign bodies to enter the slider, reducing the accuracy of the cross rail.
2. Before the new cross rail runs, the slider needs to be lubricated with special grease. Generally, the cross guide rail will be sealed with high-quality anti-rust oil in the package before leaving the factory, so try not to touch it directly with the hand.
3. When used in special environments, recommend proper surface treatment, or contact the manufacturer to customize special materials.
4. The standard product of the cross rail has been coated with anti-rust oil on the surface of the rail before shipment: if there is any action to clean the rail during the installation process, please coat the surface of the rail after the installation of the machine and equipment.
5. Since some holders are made of plastic parts, please avoid touching them or soaking them with organic solvents while cleaning to avoid damage to the product.
6. The foreign body entering the guide rail is one of the causes of failure and damage of the holder, so attention should be paid to avoid it.
7. Avoid excessive use of travel, resulting in improper impact or falling cross roller guide rail, so as not to damage its normal function.
+8615622924499
+8615622924499
